Archive for the 'TUTORIALS' Category

Airsoft guns and gearbox parts

In this post, we’ll be opening up an airsoft guns gearbox and learning the name of the gearbox parts.
If you’ve seen a gearbox for airsoft guns before you’ll know there’s quite a few gearbox parts that can appear very complicated. Unfortunately, building an airsoft gearbox is not as simple as 1-2-3, but becoming familiar with [...]

The complete airsoft guns guide: Instalment one

Introduction
When I started upgrading airsoft guns I had no previous experience in upgrading and gearbox maintenance but with a little help from Youtube, Mechbox and other sites I successfully took the gearbox apart, extended the barrel, changed the motor, changed the spring, re-shimmed the gearbox, replaced the bushings, greased the gears and put it back [...]

Mounting the ATC2K ActionCam

There are a range of options for mounting the camera on your body or airsoft guns. The best option is on your head or preferably a helmet using (of course) the helmet fitting. However it can be a quite heavy and if not wearing a helmet it can squeeze your head uncomfortably. The camera will [...]

Modifying the ATC2K ActionCam

So how to make a good camera into a great camera? The answer was to add some modifications, and it wasn’t until I’d bought it that I realised just how customisable it was.
Note: Make sure you read this entire section before making any modifications.
The first step was to improve on the narrow viewing window by [...]